Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Wimberley, TX
We’re an independent gate service provider, which means one thing up front: Gate Repair New Braunfels is not affiliated with, authorized by, or sponsored by Ghost Controls. We repair, service, and install their equipment, but we don’t speak for the manufacturer. Once that’s clear, here’s what matters: we work on Ghost Controls swing operators every week, and the one thing that makes our Ghost Controls work in Wimberley different is that we treat the ground under the operator as part of the diagnosis. Call (855) 939-0250 for a free estimate.
Why Wimberley Residents Choose Us for Ghost Controls Service
Ghost Controls builds for the DIY residential market, and there’s nothing wrong with that. The operators are straightforward, solar-friendly, and once installed correctly they do their job for years. The catch is that residential-grade hardware forgives very little when the post underneath it isn’t where it should be. We’ve put in the field hours learning exactly how these units behave when the gate goes out of plumb – what the control board reports, what the arm does, what the limit switches stop doing.
That’s most of what we do in Wimberley: diagnose. We don’t swap whole operators out of habit. We work on the brand you already have, help you decide whether a repair is the right call, and only recommend a replacement when the core is genuinely gone. Since gates are the only thing we service, your Ghost Controls operator isn’t a side job for a fence crew or a general contractor – it’s the work. We also keep the free estimate in writing, and that number is what you pay. No surprises after the technician has been on site.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in Wimberley
- Solar charging and battery faults. Long droughts and intense Hill Country UV take their toll on panel output and battery capacity. If your gate gets sluggish in late summer and starts stopping short, the problem is usually in the charging path, not the arm. We test the chain, not just the battery.
- Limit-switch drift and arm binding. This is the big one. When caliche moves under a post after a wet-dry cycle, the gate shifts out of plumb, the arm starts binding, and the control board logs a current-limit fault. You hear a gate that stops halfway or short-cycles. Adjusting the operator alone won’t fix it.
- Control-board failures after storms. Sudden Hill Country rain and lightning-adjacent surges push moisture into the control enclosure and the receiver. Boards fail, keypads stop reading, and remotes drop off. We diagnose the board before we touch the keypad.
- Hinge-weld cracking and rust. On west-facing metal gates, afternoon sun and Blanco River humidity attack weld seams first. The gate sags, the operator fights it, and the motor does more work than it should. Stainless hardware holds up far better here.
- Keypad and remote receiver failures. Moisture intrusion is the usual cause, and it’s often a simple fix once the right part is identified. Our technicians have up to 14 years of experience tracking receiver faults back to the source.
Ghost Controls Service in Wimberley: What Local Conditions Mean for Your Equipment
Wimberley sits on caliche over limestone, and most driveways slope or sit on uneven ground. That means off-the-shelf gate kits simply don’t stay true here. Custom-fabricated posts and bracing aren’t a luxury; they’re the difference between an operator that survives the season and one that keeps faulting out. Both Woodcreek and Eagle Rock sit on long, sloping driveways where this plays out fast: a single post heaves half an inch after a wet-dry cycle, and suddenly the Ghost Controls arm is over-travelling and the customer gets a current-limit fault instead of an open gate. On a Ghost Controls operator the symptom looks like electronics. It’s really the ground. When we diagnose one of these systems in Wimberley, post plumb and hinge alignment come first, then operator calibration, then the electronics.
Ghost Controls Models & Products We Service in Wimberley
We service the full Ghost Controls product family sold for residential use: the TDS2 Tandem Dual Swing series, the ATS and ARS single-swing series, and the heavy-duty solar-compatible swing operators like the TSS1. Solar setups, battery-backup configurations, single-leaf gates, dual-leaf gates, sliding operators where Ghost Controls fits – all of it is in our scope. When a control board, arm, or battery needs replacing, we favor OEM Ghost Controls parts for reliability. Where Wimberley’s humidity and sun punish a particular component (hinges, keypads), we’ll recommend quality stainless aftermarket hardware that holds up better than the OEM option. We use what fits the job, not what’s on a shelf.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Wimberley
Price is set per job by the written estimate after we’ve seen the gate. Several things move the number: whether the operator is salvageable or the board, motor, and gearbox are all compromised; whether a post has to be re-set in concrete; whether hinge welds need re-welding; and whether the diagnosis involves just the control side or the full mechanical chain. A simple limit-switch re-tune and battery check is a short visit. A post re-set into caliche is a longer one.
Our estimate is free and the number we quote is what you pay. No service-call fee, no diagnostic charge, no trip fee getting attached after the fact. Call (855) 939-0250 to schedule an on-site look – it’s the cleanest way to get a real number for your gate.
Serving Wimberley, TX – Our Local Coverage Area
We serve Wimberley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Wimberley
Because the rain saturated the caliche under one of the gate posts, the post heaved slightly, and the gate is now out of plumb – so the arm binds and the control board cuts out on a current-limit fault. It almost never means the operator is dead. The fix is usually to check post plumb and hinge alignment, re-set or re-anchor the post, then re-tune the limit switches. Call (855) 939-0250 for an exact quote – estimates are free.
Yes, provided the panel is positioned well and the battery hasn’t been cooked by long stretches of sun and heat. Hill Country UV is hard on older panels. We check output and battery health before assuming the operator is failing.
It’s usually the receiver. Moisture intrusion and storm surges degrade the receiver sensitivity, so the remote’s signal can’t reach as far. A battery swap is quick to rule out first; if the remote is fine, we test the receiver directly.
They do. Afternoon sun and Blanco River humidity attack the hinge welds on west-facing gates first, so we often find cracked welds alongside operator symptoms on the same visit. Re-welding with stainless rod is usually part of the repair.
Repair the board whenever the operator core – motor, gearbox, arm – is still sound. Replace the operator only when all three are compromised. We’ll tell you honestly which side of that line your gate falls on, and the written estimate before work starts is the number you pay. Call (855) 939-0250 for an exact quote.
Service Areas Near Wimberley
Our Ghost Controls service reaches across the Hill Country from Wimberley to Canyon Lake, San Marcos, New Braunfels, Cibolo, Seguin, and Schertz. If you’re in one of these towns and need an operator diagnosed, call and we’ll book the visit. We also cover Wimberley for repairs and new gate installation, and our full Ghost Controls expertise is available throughout the region.
Book Your Ghost Controls Service in Wimberley Today
If your Ghost Controls operator is faulting, sticking, or stopping halfway, don’t guess and don’t replace it before you know why. Call (855) 939-0250 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day appointments are often available.
Written by the team at Gate Repair New Braunfels.