Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Schertz
If your gate has stopped opening, is reversing halfway, or the keypad has gone dead, we can help. Gate Repair New Braunfels handles electric gate repair for homeowners, HOA managers, and small commercial properties throughout Schertz, and our technicians have up to 14 years of experience with both the mechanical and control sides of automated systems. We know how these gates are built here, because so many of them went up during the same construction pushes. Call (855) 939-0250. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and estimates are always free.
Why Schertz Homeowners Call Gate Repair New Braunfels for Electric Gate Repair
We’ve built a solid local reputation in Schertz by doing one thing: gates. Not fences, not garage doors, not general handyman work. That narrow focus means when we show up at a property off Schertz Parkway or in one of the newer subdivisions near Wiederstein Road, we’re looking at hardware we work on every week.
Homeowners in Schertz call us back because we work on the brand they already have instead of steering them toward a replacement they don’t need. Whether it’s a LiftMaster swing operator or a DoorKing unit at a small commercial entrance, we diagnose the actual failure before quoting anything.
Response time to Schertz is quick. We’re just up the corridor from you, and our dispatch runs Sunday through Friday, 7am to 7pm, with same-day service available on many repair calls. Your Schertz reviews and referrals are what keep us busy, and we treat that accordingly – the price is quoted and agreed before any work starts, every time.
The local knowledge matters more than people expect. We understand how builder-grade operators in this area age, how the clay soil moves posts, and what the afternoon sun does to a control board inside a metal housing. That context shortens the diagnostic.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Access Control in Schertz
Gate Access Control in Schertz usually means getting a keypad, remote system, or entry loop working reliably on a gate that was installed before anyone thought about access hardware. In newer subdivisions, that often means retrofitting a keypad onto a gate whose operator was wired with a single circuit and nothing else. A typical keypad or remote repair in Schertz runs $150 to $400, while adding new access control hardware to an existing operator generally lands between $350 and $900.
Keypads and Remote Receivers
Most access complaints trace back to a keypad that’s filled with dust and moisture or a receiver that’s lost its programming. We test the unit at the post, check the wiring back to the operator, and reprogram or replace only what’s actually failed. If the board is fine, you don’t pay for a board.
Entry and Exit Loops
Loop detectors fail quietly, and a gate that won’t close on its own is often a loop problem, not an operator problem. Replacing a loop or detector typically runs $300 to $700 in Schertz depending on how the driveway was finished. This is also where the missing conduit issue shows up most often.
Commercial Gate Operator in Schertz
A Commercial Gate Operator in Schertz has a harder job than a residential unit – more cycles per day, heavier leaves, and often a barrier arm or slide gate at a small business entrance or HOA common area. We service FAAC and DoorKing commercial operators as part of our standard work, and a typical commercial operator repair in Schertz runs $400 to $1,200, with a full operator replacement generally between $2,500 and $6,500 depending on the gate and the power situation.
Heavy-Duty Operators and Barrier Arms
Commercial units fail for the same reasons residential ones do, just faster: heat, cycle count, and worn drive components. We check the control board, the motor, and the limit settings before recommending anything, and we tell you plainly when a repair will hold and when it won’t.
HOA and Shared Access Systems
HOA-managed gates in Schertz often serve dozens of homes on one operator, and the access hardware has to hold up to that traffic. We work on the readers, keypads, and control boards that manage shared entry, and we can quote a replacement operator if the current one is beyond economical repair. The written estimate sets the final price either way.
Trusted Brands We Service in Schertz
We work on the brand you already have. Our technicians service nine major gate system brands, from entry-level residential units like Mighty Mule and Ghost Controls up to professional-grade commercial operators from FAAC, BFT, and DoorKing. That range matters in Schertz, where a single street can have a builder-installed LiftMaster on one lot and a Viking or Linear operator on the next. We don’t stock parts locally, so we diagnose first, then source what’s needed – and we’re upfront about turnaround when a part has to be ordered. Being brand-agnostic keeps the advice honest: we have no reason to push a replacement when a repair will do.
Common Electric Gate Repair Problems We See in Schertz Homes
- Builder-grade operators failing early. Operators installed during construction often sit in a sun-exposed housing where 100°F-plus afternoons cook the control board over a few summers. The motor may be fine while the board is degraded, which is why a stall doesn’t always mean a new operator.
- Manual gates retrofitted without a power run. Plenty of Schertz gates went in as manual swing gates and got an operator bolted on later, with no conduit ever run to the hinge post. The retrofit stalls on wiring, not on the operator itself.
- Shallow footings and clay soil. Post footings set in shallow concrete heave during Schertz’s dry spells, dragging the gate leaf and stalling a rack and pinion drive that has nothing wrong with it. A sag correction that ignores a shifting post just buys a repeat visit.
- Heat and drought cycles warping wood gates. Wood gates swell, crack, and warp through Central Texas drought-to-flood swings, throwing the leaf out of alignment with the operator. Misalignment wears hinges, sensors, and drive components faster.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Schertz, TX
We quote per job, in writing, before any work starts. A typical electric gate repair in Schertz runs $180 to $450 for motor, control board, or sensor work. Opener repair generally lands between $200 and $500, while keypad and remote control repair runs $150 to $400. Safety sensor repair is usually $150 to $350. If the diagnosis points to a full operator replacement, expect $1,200 to $3,500 for residential, and more for commercial-grade units.
What moves the number up or down: whether a part is in stock, whether the hinge post needs resetting, and whether new wiring has to be pulled. Those are the three cost drivers we see most in Schertz. The estimate is free, and the written price is the price – it doesn’t change once we’ve agreed to it. Call (855) 939-0250 for an exact quote.
We Also Serve Cities Near Schertz
We handle electric gate repair in Schertz and the surrounding communities, including Universal City, Cibolo, Converse, and New Braunfels. If you’re just outside the Schertz city limits, call and we’ll confirm coverage for your address. Estimates are free across the area.
Serving Schertz, TX – Our Local Coverage Area
We serve Schertz and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Schertz
Usually it isn’t the motor – the control board is the more likely culprit, especially when the stall only happens in the heat of the afternoon. Sun-exposed housings trap heat, and builder-grade boards degrade over a few summers. We test the board and the motor before quoting so you’re not sold an operator you don’t need. Call (855) 939-0250 for a free estimate.
Yes, but it’s a wiring job before it’s an operator purchase. Without conduit to the hinge post, we’ll need to plan a trench and a new power run, which means measuring the site and scheduling the work rather than fixing it the same day. We’ll give you a written estimate that covers both the wiring and the operator. Call (855) 939-0250 to set up a free measure.
We service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers everything from entry-level residential units to heavy commercial operators. If you’re not sure what’s on your gate, we can identify it during the visit. Call (855) 939-0250.
Automated gates generally require entrapment protection, and photo-eyes are the most common form – but the exact requirement depends on the gate type and your local code. Ask your city’s building department about the specific rule for your property. We check entrapment protection first on every repair call because it’s a safety issue, not a formality. Call (855) 939-0250 with questions.
It can, mainly when hardware or posts need replacing to match the approved style. The operator side rarely changes, but pickets, hinges, and post hardware sometimes have to match what the HOA approved. We’ll flag anything that could run into HOA rules before work starts. Call (855) 939-0250 for a free estimate.
Get Your Schertz Gate Working Again
If your electric gate is stalling, reversing, or refusing to open, don’t wait for it to fail completely. Gate Repair New Braunfels serves Schertz homeowners, HOAs, and small commercial properties with honest diagnostics and a written price agreed before any work starts. Call (855) 939-0250. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Written by the team at Gate Repair New Braunfels.