Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in San Marcos, TX
We provide independent Ghost Controls repair and installation across San Marcos, and we’re not tied to the manufacturer in any way. What makes our Ghost Controls work here different is that we know the local ground the operators sit on: the clay and caliche under San Marcos gate posts move with every wet and dry swing, and that movement reaches the hardware. Call (855) 939-0250 for a free estimate on a Ghost Controls gate that’s stuck, slow, or unresponsive.
Why San Marcos Residents Choose Us for Ghost Controls Service
We work on Ghost Controls equipment because we know it well, not because it’s a sideline. These are solar-friendly, DIY-oriented automatic gate systems, and homeowners, HOA managers, and small commercial property owners rely on them for daily access control. Our technicians have up to 14 years of experience, and they work both the mechanical side (arms, hinges, mounting posts) and the control and electrical side (boards, batteries, remotes, sensor wiring). Most gate shops pick one.
Here in San Marcos, that matters because the two sides fail together. A gate that’s sagged into wet soil strains the motor; a board that’s taken on water stops answering the remote. Fix one and skip the other and you’re back on the phone in a week. We diagnose the whole system, then tell you honestly what it needs.
And we use quality parts that fit the equipment. Where OEM Ghost Controls control boards, motors, and remotes are available, we use them; for wear items like batteries and hardware, we use high-quality aftermarket replacements that hold up. We’re an independent service provider, not a Ghost Controls dealer, and that’s deliberate: you get an assessment based on what’s actually wrong, not on what we’d like to sell you.
Scheduling is straightforward too. Call (855) 939-0250 and we’ll book a visit across San Marcos.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in San Marcos
These are the failures we see most often on Ghost Controls systems around San Marcos, and each one has a local reason behind it.
- Control board corrosion. After San Marcos’s spring and fall deluges, boards that took on moisture start acting erratically: opening on their own, ignoring remotes, or quitting mid-travel. Water intrusion into the operator housing is the usual culprit, and it’s more common here than in cities with deeper, better-draining soils.
- Battery and solar charging failures. Central Texas heat shortens battery life, and the dust and pollen that settle on solar panels cut charging efficiency. A unit that ran fine in spring can bog down by late summer without anything else being wrong.
- Arm and hinge binding on warped wooden gates. Much of the housing stock in 78666 includes older bungalows and ranch homes with wooden privacy gates, and those gates warp and sag as the clay under their posts swells and shrinks. That drags on the opener’s motor every cycle.
- Limit switch misalignment. When a gate frame twists after a storm, the limit switches lose their reference point, and the operator runs past its stop or stops short. You’ll notice it as incomplete opening or closing, or the unit cycling repeatedly.
- Post misalignment and water intrusion. Shallow caliche under many San Marcos lots stops posts from draining properly, so water sits around the operator housing. That’s the root cause behind a lot of board failures rather than a symptom of its own.
Ghost Controls Service in San Marcos: What Local Conditions Mean for Your Equipment
San Marcos sits where the Edwards Plateau gives way to the Blackland Prairie, and that geology shows up in gate work. On the plateau side, a lot of neighborhoods rest on shallow caliche that doesn’t drain well. Wooden posts set in that ground trap water around the base of the operator, and after heavy rain it wicks up into the housing. In the older neighborhoods around downtown and Texas State University, this plays out in batches: one big storm sags a dozen wooden privacy gates at once as the clay swells, and the Ghost Controls openers on them either strain against the new bind or take on water and fault out. A typical job after weather like that starts with an opener that’s gone unresponsive, with the control board showing moisture damage. The fix is usually a board replacement plus better drainage or sealing around the housing, and often hinge and post repair to take the strain back off the motor.
Ghost Controls Models & Products We Service in San Marcos
We service the full range of Ghost Controls products found on San Marcos properties: swing gate operators, single and dual gate openers, solar-powered setups with panel and charge-controller components, tube gate opener kits, and the remotes, keypads, and safety accessories that go with them. Whether it’s a solar-friendly DIY install a homeowner put in themselves or a kit an HOA manager inherited with the property, we can diagnose it.
Parts selection is where a lot of Ghost Controls repairs get cut short. We match what we install to the unit in front of us, using OEM components when they’re available and quality aftermarket parts for the wear items. Nothing gets swapped for a part that doesn’t fit the system. We also service the Architect Series and Heavy-Duty Series, along with the Solar-Powered Series and tube gate opener kits.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in San Marcos
We quote prices by the job, and we set them in writing before any work starts. The estimate is free, and it covers the diagnosis: we inspect the board, battery, solar components, arm, hinges, and posts, then lay out what needs to happen and what it will cost. If a repair approaches half the price of a modern kit, we’ll tell you that too, and let you choose.
What drives the cost on a Ghost Controls repair in San Marcos is whether the fix is electrical, structural, or both. A battery or remote swap is a small job. A control board replacement with drainage work is bigger. Add a post reset or hinge repair to correct a sagging gate and the scope grows again. If you’re looking at a unit with recurring board failures after storm damage, we’ll give you a straight comparison of repair versus replacement rather than pushing one.
Call (855) 939-0250 for a free estimate on your Ghost Controls system.
Serving San Marcos, TX – Our Local Coverage Area
We serve San Marcos and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in San Marcos
Control board corrosion from water intrusion is the most likely cause, especially after the heavy rain bursts San Marcos gets in spring and fall. Moisture gets into the operator housing, often through a post that isn’t draining, and the board starts faulting or stops responding. Call (855) 939-0250 for a free estimate; we can usually confirm it on the first visit.
It can usually be repaired. A corroded board is a replaceable part, and we’ll also address the drainage or sealing that let the water in, so the new board doesn’t fail the same way. Replacement makes sense when a unit has repeated board failures, storm damage to the motor, or a repair cost approaching half the price of a modern kit. We’ll give you that comparison honestly.
It moves the posts, and moving posts strain the hardware above them. Expansive clay swells after rain and shrinks in the dry heat, so wooden gate posts shift, gates sag, and the opener’s arm has to push through the bind. On top of that, shallow caliche stops water from draining away from the post, which is how moisture reaches the operator housing in the first place.
Yes, with one caveat: they need occasional cleaning. Solar-friendly systems work well in this climate, but Central Texas dust and pollen coat the panels and cut charging efficiency, so a unit that’s fine in spring can lag by late summer. A panel and charge-controller check is part of our diagnostic, and we’ll clean, reposition, or replace components as needed.
Heat is the main variable, and Central Texas summers shorten battery life compared to cooler climates. If your opener starts struggling, holding a charge poorly, or faulting after rain, the battery is a good early suspect. We’ll test it during a free estimate. Call (855) 939-0250 to schedule.
Most repair visits wrap up in a single appointment. A board swap or battery replacement is quick once we’ve confirmed the diagnosis; a job that also includes post or hinge repair takes longer because we reset the gate to realign it and take the strain off the motor. We’ll give you a clear time estimate before we start.
Service Areas Near San Marcos
We also handle Ghost Controls gate work in New Braunfels and Wimberley, along with Cibolo, Seguin, Schertz, and Canyon Lake. If you’re just outside San Marcos proper, call and we’ll confirm coverage for your address. Service areas are local and can vary by city.
Book Your Ghost Controls Service in San Marcos Today
A gate that won’t open is an access problem, and it usually gets worse in wet weather. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and same-day service is often possible. San Marcos homeowners, HOA managers, and commercial property owners can call (855) 939-0250 for a free estimate on Ghost Controls repair, installation, or both.
Written by the team at Gate Repair New Braunfels.