Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateWhy New Braunfels Homeowners Choose Ghost Controls Gate Repair
Gate Repair New Braunfels provides independent Ghost Controls gate repair in New Braunfels, TX, working on AXO swing arms, dual-arm double-gate kits, residential slide operators, and solar-ready setups. What sets our Ghost Controls work apart is that we see these operators often enough to know how their control boards, limit switches, and battery logic fail under Central Texas heat. We’re independent, not affiliated with or authorized by Ghost Controls, so we diagnose the unit you actually own and give you a straight answer. Call (855) 939-0250 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Gate Repair New Braunfels for Your Ghost Controls Gate Repair?
Ghost Controls operators are built for the DIY market, and that shapes how they get installed and how they fail. A lot of units here were put in by the property owner or a previous owner, on posts that weren’t set with limestone in mind. Our technicians have up to 14 years of experience working the mechanical and control sides of automated gates. That means we read the board, trace the charge circuit, and watch the arm geometry as one system rather than swapping parts until something works.
We use quality parts that fit Ghost Controls equipment. Where a unit is current, that means OEM boards, receivers, limit switches, and arms. For batteries and rack we’ll use aftermarket parts when they meet or exceed spec, and we’ll tell you which way we’re going and why. We’re not a Ghost Controls dealer, and we don’t claim to be factory-trained or certified. We’re an independent shop that knows the brand.
Warranty-safe practice matters on these operators. We document what we find, photograph the board and battery before we touch anything, and only replace what’s actually failed. You should always check the terms of your own Ghost Controls warranty before repair work, and we can work with your insurer if a claim is involved.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Fix in New Braunfels
These are the failures New Braunfels owners actually call about, not a generic list pulled from a manual.
- Control-board and battery-charging faults on solar-ready swing units. The gate runs a few cycles, then stalls or reverses. The usual cause is a battery that isn’t holding charge while the panel or charge circuit isn’t keeping up, and summer heat accelerates it. We load-test the battery, check the charge circuit under real draw, and confirm the board is managing power correctly before we call it a board fault.
- Limit-switch drift and arm-geometry misalignment on AXO swing arms. The gate over-travels, stops short, or reverses mid-cycle. This almost always shows up after hinge sag or a post shift. Limestone ground under Comal County doesn’t let posts sit as deep as installers expect, so the whole arm geometry changes when the post moves. Re-setting limits without correcting the geometry just buys you a few weeks.
- Remote and receiver pairing problems, plus range drop-off. Remotes stop registering, or they only work when you’re right at the gate. We trace it to the receiver module, antenna lead routing, or a worn battery in the remote. Antenna routing matters more than people think, especially when a neighbor’s operator is on a similar frequency nearby.
- Rack-and-pinion slide wear, chain tension, and clutch slip. A slide gate that binds, grinds, or stalls partway is stressing the motor and the board every time it runs. We check rack alignment, chain tension, and clutch settings together, because fixing one and leaving the others will just move the strain somewhere else.
- Heat-related finish and hardware degradation. Central Texas summers bake powder-coated finishes and warp wood gate leaves, which throws off the arm stroke and puts uneven load on the operator. When the gate itself is part of the problem, fixing the operator alone won’t hold.
Ghost Controls Parts & Our Repair-vs-Replace Approach
We don’t stock parts and we don’t carry Ghost Controls inventory. We source what fits your unit, and we tell you what we’re sourcing and why before the work starts. On a current unit, OEM boards, receivers, limit switches, and arms are the right call. For batteries and rack, we’ll go aftermarket when the part meets or exceeds the original spec, because that’s often the more practical choice on a DIY-market operator.
Repair versus replace comes down to how the unit is failing, not how old it is. A board that failed once is a repair. A board that keeps failing after a motor, battery, and charge circuit have all been verified points to something else in the system, or to a rebuild or full operator swap being the more sensible spend. We’ll tell you which side of that line you’re on even when the answer is the cheaper one. The price is quoted and agreed before any work starts, and the written estimate sets the final price.
Call (855) 939-0250 for an honest read on your Ghost Controls operator. Estimates are free.
Our Ghost Controls Service Process – Step by Step
- 1
Diagnosis. We watch the gate cycle, listen to the motor and arm, and measure the battery under load. On a Ghost Controls swing arm we check limit positions against the actual gate geometry, not just the programmed values. If the post has shifted, we say so.
- 2
Repair or install. Once we know what failed, we quote the repair in writing before anything is touched. For a new install, we measure the site and set the operator, arms, rack, and safety edges to the gate as it actually sits on its posts.
- 3
Test. We cycle the gate through full open and close, test obstruction reversal, check safety sensor alignment, and confirm the charge circuit is keeping up with real use. Then we re-pair receivers and remotes so everything works from a realistic distance.
- 4
Warranty and documentation. You get a record of what was replaced and why. That matters if you ever need to make a claim, and it matters for the next technician who looks at the gate.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Products We Service & Install in New Braunfels
We service and install the Ghost Controls lines New Braunfels properties actually run: AXO swing gate openers in single and dual-arm configurations, dual-arm kits built for double gates, residential slide operators on rack-and-pinion drives, and solar and battery-backup setups. We also handle add-on access equipment, including keypads, replacement remotes, receivers, and safety sensors.
That covers motor repair, battery backup, and smart access on Ghost Controls equipment, plus new gate installation when a repair stops making sense. Here’s the local reality: New Braunfels sits between two very different gate markets. The older core near downtown and Sophienburg Hill has wrought-iron and wood privacy gates on century-old lots, while the growth corridor out along FM 306 toward Canyon Lake is full of new-construction acreage properties with long fenced driveways and automatic swing or slide gates. Both ends of town run into the same thing, which is Edwards Plateau limestone sitting shallow under the soil. Posts hit rock early, and settling and heaving limestone is the top cause of sagging gates here. On Canyon Lake-area properties, deer pressure is heavy enough that the gate becomes the weak point in a 6-to-8-foot game fence, and a gate that “sags” is often a post that pulled out of shallow rock rather than a hinge problem.
We Also Service These Brands
We’re not tied to one brand. If your gate runs a LiftMaster, Mighty Mule, or DoorKing operator instead of Ghost Controls, we work on it. We also service FAAC, BFT, Linear, Viking, and Elite. That range matters when you’re deciding whether to repair or replace: a brand-agnostic diagnosis means we’re not steering you toward a new unit because it’s the only one we know.
FAQs – Ghost Controls Gate Repair Service in New Braunfels
No. Gate Repair New Braunfels is an independent service provider and is not affiliated with or authorized by Ghost Controls. We’re not a dealer and we’re not factory-trained or certified by the manufacturer. What we are is experienced with the brand, and independence means our diagnosis isn’t shaped by a dealership relationship. Call (855) 939-0250 for a free estimate.
Yes. Where your unit is current we use OEM Ghost Controls boards, receivers, limit switches, and arms, and we use quality aftermarket batteries and rack when they meet or exceed the original spec. We don’t stock parts and we’re not a dealer, so we source what fits your unit and tell you what we’re using before we install it. Call (855) 939-0250 and we’ll walk through the options.
Most Ghost Controls repairs are handled in a single visit. Limit-switch re-setting, remote and receiver re-pairing, and battery or charge-circuit diagnosis are same-day work when we have the part on hand or can get it quickly. A full operator replacement or a new installation is measured, ordered, and scheduled rather than same-day, because the site has to be assessed and the right unit ordered to fit your gate. Call (855) 939-0250 and we’ll give you a realistic timeline for your specific gate.
We cover AXO swing gate openers in single and dual-arm setups, dual-arm kits for double gates, residential slide operators, solar and battery-backup configurations, and add-on access equipment including keypads, remotes, receivers, and safety sensors. That spans motor repair, battery backup, and smart access work. Call (855) 939-0250 if you’re not sure which category your unit falls into.
We can’t speak for Ghost Controls’s warranty terms, so check them before any repair. What we do is work in a warranty-safe way: we document the failure before touching anything, we replace only what’s failed, and we give you a record of the work. Many manufacturers require that service be performed by a qualified technician with documented parts, which we provide. Call (855) 939-0250 and we’ll explain exactly what we’d do on your unit.
There’s no flat number, because the price depends on what’s failed and whether a repair or replacement is the honest answer. A limit-switch re-set or remote re-pairing costs far less than a control board, and a slide operator rebuild sits in a different range again. The estimate is free, and the price is quoted and agreed before any work starts, with the written estimate setting the final price. Call (855) 939-0250 for an exact quote on your Ghost Controls gate.
The gate is almost certainly hitting a limit it shouldn’t, or reading an obstruction that isn’t there. On an AXO-series arm, the usual cause is a limit switch that has drifted after hinge sag plus a solar-charged battery that no longer holds under load. A typical call starts with a gate that opens partway and reverses, or a remote that only works up close; a qualified local pro re-levels the arm geometry, re-sets the limits, load-tests the battery and charge circuit, and re-pairs the receiver and remotes so the gate cycles cleanly. Call (855) 939-0250 to get this diagnosed.
Usually the battery, but we test both before we tell you which. In Central Texas heat, a battery loses capacity faster than it would in a cooler climate, so it can accept a full charge at noon and still sag under load by evening. We load-test the battery and check the panel and charge circuit under real draw, then quote the fix in writing before we start. Call (855) 939-0250 for an exact quote.
Yes. We handle remote pairing, receiver swaps, and keypad add-ons on existing Ghost Controls units. Range problems often come down to receiver module condition or antenna lead routing rather than the remotes themselves, so we check the receiver before recommending anything. Call (855) 939-0250 to schedule a visit.
It depends on what’s causing the grind. Rack-and-pinion wear, chain tension, and clutch slip often make a slide gate bind or stall, and correcting those is usually cheaper than a new operator. If the motor and board have taken repeated strain from a binding gate, a rebuild or full swap may make more sense. We’ll tell you honestly which side of that line you’re on. Call (855) 939-0250 for a free estimate.
Yes. We service LiftMaster, Mighty Mule, DoorKing, FAAC, BFT, Linear, Viking, and Elite alongside Ghost Controls. Being brand-agnostic means we’re not pushing a replacement because it’s the only brand we know. Call (855) 939-0250 and we’ll diagnose what you actually have.
Book Your Ghost Controls Service in New Braunfels, TX
Whether your Ghost Controls operator needs a limit reset, a battery and charge-circuit diagnosis, or a full install on a new gate, we’ll give you a clear diagnosis and a written price before anything starts. Call (855) 939-0250. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Written by the team at Gate Repair New Braunfels.