Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Schertz, TX
Gate Installation in Schertz usually means one of two jobs: replacing a builder-grade privacy gate that’s reached the end of its life, or fitting an automated driveway gate onto a property that never had one. Schertz sits in a stretch of Central Texas where new subdivisions keep going up between San Antonio and New Braunfels, and the gates that go in with those houses don’t always hold up to the heat and the clay soil underneath them. We work on the brand you already have and we’ll tell you honestly whether it can be repaired or should be replaced. Call (855) 939-0250 to set up a free estimate.
Why Schertz Homes Are Different
Most of Schertz was built between the 1990s and the 2020s, and the housing stock shows it. Master-planned subdivisions dominate, and wood privacy fences with matching gates are the norm. Many of those gates are original builder-grade units with steel hinges and self-closing hardware that simply wear out within a decade of installation. That’s a different starting point from an older city where gates have already been replaced two or three times.
The ground is the second factor. Expansive clay soils shift through the drought-to-flood cycle that defines this part of Texas, and fence posts move with them. In newer Schertz subdivisions, posts are often set in shallow concrete that heaves during dry spells, and the gate starts to drag. It’s usually worst on the west-facing side, where the afternoon sun bakes the wood through the summer. Central Texas heat does the rest: wood gates warp, crack, and swell, and hardware that lined up in spring won’t necessarily line up by August.
HOA rules add a third layer. Schertz subdivisions tend to have strict architectural standards, which matters when you’re replacing pickets or hardware and need the gate to match the rest of the fence line. Getting the style right the first time saves a second conversation with the board.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Schertz Services
Two kinds of calls come in from Schertz more than any other: gates that have stopped working and gates that need to be replaced or automated from scratch.
Gate Repair in Schertz
Most repair calls here involve a wood or vinyl privacy gate that’s sagging, dragging, or won’t latch because the posts have shifted in the clay. We look at the whole assembly – hinges, frame, post footing, latch alignment – before recommending anything, because a gate that’s been adjusted to compensate for a moved post will be back to dragging within a season. Sometimes the fix is resetting the post, sometimes it’s new hardware, and sometimes the gate has simply reached the end of its service life. For a closer look at how we handle these calls, see Gate Repair in Schertz.
Electric Gate Repair in Schertz
Automated gates in Schertz run into the same mechanical problems as manual ones, plus the electrical side: control boards, motors, and safety sensors. When an operator stops responding, the cause could be a bound gate, a failed board, or a sensor that’s out of alignment – and diagnosing which one takes a technician who works on both halves of the system. We handle LiftMaster and DoorKing operators among others, and we don’t assume a dead operator means a new gate. For automated systems specifically, see Electric Gate Repair in Schertz.
Gate Installation in Schertz
Gate Installation in Schertz is mostly about solving problems the original builder left behind. Gates on 1990s and 2000s homes here have usually outlived their steel hinges and self-closing hardware, and the posts underneath them have moved. On newer homes, the issue is different: shallow concrete footings that heave in dry weather, and wood that’s been baked on the west side since the day it went up. A new gate that’s set properly from the start, with footings at the right depth and hardware suited to the load, avoids most of that. We handle the full range, from Gate Installation on a simple privacy gate to automated driveway systems.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car every time, or the existing operator has failed twice in a season and the gate itself is still sound.
What it costs in Schertz
Automated gate installation typically runs from about $2,500 to $6,500, depending on gate size, operator class, and whether power needs to be run to the location.
How we do it
We measure the opening, confirm the gate’s weight and swing or slide path, match an operator to it, run the power and safety edges, then test the full cycle and set the limits before we leave.
Driveway Gate Installation
Signs you need it
The driveway has no gate at all, or the existing one is too narrow or too light for daily vehicle traffic.
What it costs in Schertz
Driveway gate installation typically falls between $2,500 and $6,500, with the final figure set by the written estimate once we’ve seen the opening and the soil conditions.
How we do it
We set posts at proper footing depth for the clay here, hang the gate so it clears through the full swing, and fit hardware rated for the panel weight.
What Gate Installation Costs in Schertz
These are typical ranges, not quotes. The written estimate you get after we’ve measured the opening is what sets the final price.
| Item | Typical range in Schertz |
|---|---|
| Automatic gate installation | $2,500 – $6,500 |
| Driveway gate installation | $2,500 – $6,500 |
| New gate with operator, power run, and safety edges | $2,500 – $6,500 |
Do I need a permit to install a gate in Schertz?
Most cities require a permit when you’re adding an automated gate with new electrical work, so ask the City of Schertz building department directly. Your HOA also has a say on style and materials – we’ll match whatever the board has approved.
Can you match my HOA-approved gate style?
Yes. Schertz subdivisions tend to have strict architectural standards, so we confirm the approved style before ordering anything. That way the replacement matches the fence line and you don’t end up with a second conversation with the board.
Brands We Service in Schertz
We work on the brand you already have. That covers DoorKing and LiftMaster operators, Elite systems, and entry-level units like Mighty Mule that show up on residential gates around Schertz. No parts are stocked locally – we diagnose first, then source what’s needed. Take a look at our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Schertz, TX
| Service | Typical range in Schertz |
|---|---|
| Automatic gate installation | $2,500 – $6,500 |
| Driveway gate installation | $2,500 – $6,500 |
| Gate with operator, power run, and safety edges | $2,500 – $6,500 |
| Slide gate with operator | $2,500 – $6,500 |
In Schertz, price is pushed up by post conditions – shallow footings that need resetting before anything can be hung – and by whether power has to be run to a location that never had it. Gate weight and operator class matter too. Whatever the number turns out to be, it’s quoted and agreed before any work starts, so there are no surprises on the invoice.
Neighborhoods We Serve in Schertz
We cover gate work across Schertz, including the newer subdivisions where builder-grade gates are now hitting the ten-year mark and the clay has started to move the posts. If your gate is dragging on the west-facing side, that’s the pattern we expect to find. Fast dispatch from 7am to 7pm, Sunday through Friday.
- Schertz 78154
- Subdivisions along the San Antonio – New Braunfels corridor
- Master-planned communities off the main Schertz thoroughfares
- Newer builds where original gate hardware is wearing through
Service Area – Cities Near Schertz
Schertz sits between San Antonio and New Braunfels, and our gate work covers the surrounding communities as well. If you’re just outside Schertz, we can usually still help – call and we’ll confirm coverage for your address. Nearby cities we serve include Universal City, TX, Cibolo, TX, Converse, TX, and New Braunfels, TX. For gate work in the New Braunfels area, see our Gate Repair New Braunfels page.
Serving Schertz, TX – Our Local Coverage Area
We serve Schertz and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Schertz
We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. For repair calls in Schertz we aim for same-day where the schedule allows.
HOA approval is almost always required in Schertz subdivisions, and most cities require a permit when new electrical work is involved. Ask the City of Schertz building department about the permit, and check with your board on style before ordering.
We cover Schertz and the surrounding communities between San Antonio and New Braunfels. Service boundaries vary by address, so call (855) 939-0250 and we’ll confirm coverage before booking anything.
If your gate is dragging, won’t latch, or has an operator that’s stopped responding, call (855) 939-0250 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 14 years of experience, and the price is quoted and agreed before any work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Schertz Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Emily Schaefer"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Marisol Flores"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Norma Castillo