Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Cibolo, TX
We provide independent Ghost Controls gate repair across Cibolo, TX, and the one thing that makes our work here different is this: nearly every Ghost Controls operator we see is bolted to a builder-installed gate on soil that keeps moving. The control board is usually fine. The gate has gone out of square. We’re an independent service provider, not affiliated with Ghost Controls in any way. Call (855) 939-0250 and we’ll talk through what your operator is doing. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Cibolo Residents Choose Us for Ghost Controls Service
Ghost Controls builds open-gate operators that homeowners and small commercial property owners install themselves, and they’re common on suburban privacy and driveway gates around San Antonio. That means the operators here are usually a few years old, out of warranty, and sitting on a gate that was never perfectly hung to begin with. We know how these units think: how the limits behave, how the sensitivity reacts to a leaf that’s off by a half inch, how the battery and solar charging side fails quietly before the motor ever does.
We’re also independent, which matters. We aren’t a Ghost Controls dealer and we don’t sell the brand, so there’s no reason to push you toward a replacement board when the real problem is a hinge. We work with quality parts that fit your operator and preserve its configuration. Same idea on the scheduling side: you get a straight answer about what’s likely wrong and what it takes to fix it, and the price is quoted and agreed before any work starts.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in Cibolo
These are the failures we run into most on Ghost Controls equipment in and around Cibolo.
- Operator stalls mid-travel or reverses on its own. This is the number one Ghost Controls complaint we hear, and it almost always traces back to Cibolo’s expansive clay soils. The gate post shifts a little each wet and dry cycle, the leaf goes out of square, and the operator’s limit and sensitivity settings no longer match the gate’s actual travel. The fix starts with the hinge and post alignment, then a reset and re-test of the limits.
- Dead gate after a summer or a freeze. Swollen or sulfated batteries and degraded solar charging components turn a Ghost Controls unit into a gate that opens halfway and quits. Cibolo’s hot, humid summers and occasional hard freezes push battery chemistry harder than the manual accounts for, and a few seasons is often enough to take one out.
- Control board and accessory wiring corrosion. Where remotes, keypads, or an intercom tie into the operator, humidity and freeze-thaw cycles at the connections cause intermittent behavior – a keypad that works one week and not the next, a remote that only responds up close. We trace the accessory wiring before condemning the board.
- Gear and arm wear on a gate that fights back. Builder-grade metal and vinyl driveway gates sag on their hinges over time, and a working Ghost Controls operator then strains against a gate that no longer swings freely. Left alone, that wear eats the gears and the arm. Correcting the gate and the operator together is the only fix that lasts.
- Mismatched repairs on HOA-gated property. In Cibolo’s master-planned subdivisions, the gate style and color are set by HOA architectural rules, so finishing a repair means matching the original builder-approved hardware and finish rather than whatever fits. We plan for that on the estimate, not after the fact.
Ghost Controls Service in Cibolo: What Local Conditions Mean for Your Equipment
Most of Cibolo’s housing went up in the last 25 years, which tells you what a typical Ghost Controls call looks like here. The operator is bolted to an original builder-installed gate, and that gate is now hitting its first real wear cycle. In the master-planned subdivisions, HOA architectural rules lock in the gate’s style and color, so a repair has to be finished with hardware and finishes that match the builder-approved look. That constraint shows up on nearly every Cibolo driveway-gate call, and it’s a different job from repairing legacy wrought iron in the older San Antonio neighborhoods. Out here, the work is correcting original builder shortcuts and retrofitting hardware so the gate stays uniform with the rest of the street. A technician who doesn’t know to look for that will hand you a fix that doesn’t hold up to the HOA, and you’ll be back on the phone.
Ghost Controls Models & Products We Service in Cibolo
Ghost Controls makes single and dual swing gate operator kits, and we service both. That covers the dual-gate setups where a second operator is synced through a dual-gate adapter, the gear replacement kits that go on when the arm has worn out, and the battery and power components that keep the whole thing running. We also handle the accessory side: keypads, remotes, and wireless entry accessories that tie into the operator.
When it comes to parts, we use Ghost Controls-compatible components where they preserve your operator’s settings and keep the configuration intact, and quality aftermarket hinges, latches, and keypads where they hold up better in Cibolo’s climate. A keypad that’s built for the occasional dry spell doesn’t last here; we pick hardware that can handle the humidity and the freezes.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Cibolo
Ghost Controls service in Cibolo is priced per job, and we set the number with a free estimate before we touch anything. What drives the cost is mostly how far the repair reaches. A limit reset and hinge adjustment sits on the low end. A battery or solar charging diagnosis and replacement pushes it up a bit. A control board or gear replacement is the larger job, and when a swing operator’s board, gears, and battery are all failing at once, honest replacement is usually more economical than chasing repairs. The written estimate sets the final price, and the price is quoted and agreed before any work starts. Call (855) 939-0250 for an exact quote – estimates are free.
Serving Cibolo, TX – Our Local Coverage Area
We serve Cibolo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Cibolo
In Cibolo, this is almost always a gate-post shift caused by expansive clay soil throwing the swing leaf out of plumb. The operator’s limits and sensitivity no longer match the gate’s travel, so it stalls or reverses. The fix is to correct the hinge and post alignment first, then reset and re-test the limits. Call (855) 939-0250 for an exact quote – estimates are free.
Yes, if the hardware and finish are matched to the HOA’s approved gate style and color. That’s the constraint in most Cibolo master-planned subdivisions, and it’s the reason a repair here has to be planned around the builder-approved look rather than whatever fits. We factor it into the estimate so you don’t get surprised later. Call (855) 939-0250 for an exact quote – estimates are free.
More often the battery, or the solar charging components feeding it. Swollen or sulfated batteries give out first after a hard freeze, and a degraded charger leaves the replacement flat in turn. A board failure is possible but less common, and we test the power side before condemning the board. Call (855) 939-0250 for an exact quote – estimates are free.
Usually yes. Keypads, remotes, and intercoms typically re-tie to a new operator through the accessory wiring, though the connections often need refreshing on older installs. We check the wiring and the accessories as part of the job so the integration actually holds. Call (855) 939-0250 for an exact quote – estimates are free.
Repair makes sense when one thing has failed – a hinge out of alignment, a battery at the end of its life, a gear worn from a sagging gate. When the board, gears, and battery are all failing at once, replacement is usually the more economical call. We’ll tell you which camp you’re in before any work starts. Call (855) 939-0250 for an exact quote – estimates are free.
Service Areas Near Cibolo
We serve Ghost Controls gate repair across the Cibolo area, including Schertz and Universal City, along with New Braunfels, Seguin, and Wimberley. If you’re on the edge of one of these towns, call and we’ll confirm coverage. Our Ghost Controls repair work is what we do, and our Cibolo service covers the whole area around it.
Book Your Ghost Controls Service in Cibolo Today
Whether it’s an electric gate repair, a motor issue, or a battery backup that’s stopped holding, we’ll diagnose it and give you an honest answer about repair versus replacement. Same-day service is often available. Call (855) 939-0250 for a free estimate. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
Written by the team at Gate Repair New Braunfels.