Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Seguin
If your gate won’t open, won’t latch, or stopped mid-travel, call (855) 939-0250. We answer 24/7, fast dispatch runs 7am-7pm Sunday through Friday, and we work on the brand you already have – Viking, Ghost Controls, DoorKing, Elite, or any of the others we know inside out. We handle gate repair, electric gate repair, and full gate installation, so a broken operator doesn’t automatically mean a new system.
Seguin is a spread-out town. A driveway gate off a busy stretch near downtown and a farm entrance 300 feet back on acreage don’t fail the same way, and we look at the whole setup – post, panel, hinge, and operator – instead of just swapping a part.
- Gate repair, electric gate repair, and installation under one company
- Up to 14 years of experience on our technicians
- Brand-agnostic diagnostics – no push toward a replacement you don’t need
- Free estimate, price agreed before any work starts
- Single-trade focus: gates only
Why Seguin Homeowners Call Gate Repair New Braunfels for Gate Repair
Seguin sits right on the line between blackland prairie clay and sandy post-oak country to the north, and that single fact drives most of the gate repair calls we get here. A gate post heaving in gumbo clay near town and a pipe-rail entrance set back in sand behave completely differently. Clay swells and lifts the footing; sand lets it work loose. Reading which one you’re dealing with is the first thing a gate technician should do.
We’re a dedicated gate repair company, not a general fence or garage-door outfit that adds gates to a menu. Electric and automated systems are a core part of the work, and our technicians bring up to 14 years of experience across both the mechanical and control sides. Whether it’s a Ghost Controls DIY unit on a rural driveway or a heavy DoorKing swing operator at a small commercial property, the diagnosis starts the same way.
We serve the whole Seguin area, from older in-town lots with wood posts set decades ago to acreage entrances out toward Seguin‘s rural edges. If you need us, we’ll set a time and confirm it before the technician heads out.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Sliding Gate Repair in Seguin
Sliding Gate Repair in Seguin usually centers on a gate that never ran clean to begin with. When the operator is rated for less than the wide-span farm and pipe-rail gates out on the acreage, the rack and pinion wears fast and the gate stalls mid-travel. A lighter residential slider on an in-town driveway can also bind after a hinge post shifts and throws the track out of line. For a residential slider, a typical repair runs $275-$700 for realignment, rollers, and control work; heavy commercial sliders cost more, because the operator and safety devices are more involved. We confirm the cause before quoting, then you approve a written price before we touch a thing.
Rack, Pinion, and Operator Wear
When a wide gate is driven by a light-duty operator, the rack and pinion takes the load every cycle. Worn teeth and binding show up as jerky travel or a stall partway along the run. We inspect the operator against the gate’s actual weight and span, then recommend resizing or repairing rather than repeating the same failure.
Track and Roller Realignment
A slider that “wanders” or jumps the track is often a post problem wearing the gate down. Rollers, guide brackets, and track height need to line up within a fraction of an inch. We reset the hardware to the track and correct the underlying alignment instead of just replacing worn parts.
Wrought Iron Gate Repair in Seguin
Wrought Iron Gate Repair in Seguin is often about metal that’s fine structurally but has come loose or rusted through at the worst joints. On older in-town lots, wrought iron and ornamental steel gates tend to sag because a post footing has tilted, not because the frame itself is weak. Hinge and post repair is usually the fix. Weld and rust repair covers cracked welds, rusted latch guards, and repaired bars. A typical wrought iron repair in Seguin runs $250-$600, with larger ornamental driveway gates at the higher end once post resets and re-welding are involved. We give you a written estimate before starting.
Rust and Weld Repair
Rust creeps in where water sits – bottom rails, latch pockets, and hinge mounts. We cut out and re-weld failed metal and treat the joint so it doesn’t fail again the same way. The goal is a solid gate, not a patch that hides the problem.
Sagging Frames and Hinge Post Correction
A sagging wrought iron gate that you keep tightening is almost never a hinge problem. The footing has moved, and the hinge takes the blame. We reset or re-pour the post to the correct depth and re-hang the panel so the gate swings true.
Trusted Brands We Service in Seguin
We work on the brand you already have. That means Viking and Ghost Controls units on rural driveways, DoorKing for small commercial access control, Elite and Linear for residential automated gates, and LiftMaster, FAAC, BFT, and Mighty Mule in between. We don’t stock parts on a truck – the wrong way to fix a gate is to force a part you have in hand onto a problem you haven’t diagnosed – so we identify the fault first and get the right component. That keeps turnaround quick without pushing a replacement your operator doesn’t need.
Common Gate Repair Problems We See in Seguin Homes
- Hinge post heave after the first big rain. Clay soil near town swells after a dry stretch and tilts the footing, so a swing gate that cleared all summer suddenly drags its latch. The fix is at the post, not the hinge.
- Loose footings in sandy post-oak country. Out on the acreage, the opposite happens – sand lets footings work loose instead of swelling. Posts lean over time and need resetting to proper depth.
- Solar openers dying on long rural driveways. A gate that stops working after cloudy days is often a weak battery or a panel starved of sun, not a bad operator. We check power and battery health first.
- Wood posts rotted at the soil line. Much of Seguin’s older housing stock had posts set in concrete decades ago, and Central Texas heat and alternating drought and rain rot wood at the ground. We catch the rot before it takes the whole gate down.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Seguin, TX
Here’s what repair work typically runs in the Seguin market. Small fixes like a hinge, latch, lock, or sensor adjustment usually land around $150-$350. Post resets, weld and rust repair, and gate realignment run $250-$700 depending on how much footing work is involved. Electric gate repair – control board, motor, battery, or safety device replacement – typically runs $200-$650. On the acreage, wide-span farm gates and resized operators push toward the top of those ranges. What moves the number is the depth of footing work, the operator’s condition, and whether the gate needs to come off and go back on. The free estimate sets your actual price in writing, and that’s the number you pay – no surprises after the work.
We Also Serve Cities Near Seguin
Our gate repair team covers the towns around Seguin as well: New Braunfels, Cibolo, Schertz, and Universal City. If you’re just outside Seguin proper, a quick call confirms coverage and timing for your address. Our gate repair service runs across the whole area.
Serving Seguin, TX – Our Local Coverage Area
We serve Seguin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Seguin
The footing under your hinge post has moved. On the acreage, shrunk clay swells after heavy rain and tilts the post, so the gate drags even though the hinges are tight. A qualified technician pulls the panel, resets or re-pours the footing to proper depth, re-trues the frame, and re-hangs the gate before touching the operator. Call (855) 939-0250 for a free estimate.
Yes, and on many rural driveways it’s the right choice where running mains power isn’t practical. The catch is battery health and panel placement – if the panel is shaded or the battery is old, an automatic driveway gate goes dead and gets misdiagnosed as an operator fault. We check power, battery, and the rack and pinion together. Call for a free estimate.
Test it without standing in the gate’s path. Walk a hand or object through the photo-eye beam and listen for the operator to reverse or stop, and check that the loop detector releases. If it doesn’t, don’t rely on it – the operator and wiring are dangerous to work on live, so a trained professional should service it. Call (855) 939-0250.
Because the hinges likely weren’t the problem. A gate that sags again after tightening is telling you the post footing has tilted – clay heave near town or sandy soil working loose on the acreage. The fix is under the ground. Call for a free on-site estimate.
Wrought iron repair usually means weld, rust, hinge, and post correction on a swing gate; sliding gate repair usually means alignment, rollers, track, and the operator’s rack and pinion. Different failure modes, different parts. Tell us what the gate does and we’ll diagnose the right one. Call (855) 939-0250 for a free estimate.
Call for a Free Gate Repair Estimate in Seguin
Whether it’s an in-town wrought iron gate that won’t latch or a solar operator on a long rural entrance that quit after a storm, we’ll look at the whole setup and tell you straight whether it’s a repair or a replacement. Our gate technicians bring up to 14 years of experience, and we work on the brand you already have. Call (855) 939-0250. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the price is agreed before any work starts.
Written by the team at Gate Repair New Braunfels.