Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Universal City
If your driveway gate has started dragging, reversing for no reason, or refusing to open at all, we can help. Universal City is a compact, built-out town where most electric gates are original to their lots, so the repair work we do here is different from what you’d find in a newer suburb. We know the older operators and the fence-and-gate layouts that dominate the subdivisions off Pat Booker Road, and we bring that familiarity to every call. Our technicians have up to 14 years of experience, and we’re insured and bonded. Call (855) 939-0250. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Universal City Homeowners Call Gate Repair New Braunfels for Electric Gate Repair
Universal City is small and mostly surrounded by San Antonio, which means you’ll see the same few gate systems over and over. We’ve built a local reputation on that reality: we work on the brand you already have instead of steering you toward a replacement you might not need. Our electric gate repair team handles both the mechanical side (hinges, posts, sag) and the control side (boards, motors, sensors), so a single visit can get to the actual cause.
We keep our focus on gates only. We’re not a general fence or garage-door outfit that treats a gate call as an afterthought, and that single-trade focus matters on older systems where the fix is as much about alignment as it is about electronics. We serve Universal City and the surrounding neighborhoods, and we bring honest guidance to the repair-versus-replace question rather than a sales pitch. If a control board can’t be sourced, we’ll tell you plainly; if resetting a hinge post solves it, we’ll do that instead.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Access Control in Universal City
Gate access control in Universal City is the part of the system most likely to fail on an older installation. Keypads cloud over with age, remotes stop pairing, and photo eyes lose alignment when a post settles. A Universal City homeowner usually calls when the gate opens for one car but not the next, or when an entry keypad stops responding altogether. Most of this work falls in the $150 – $400 range for a repair, with a full access-control retrofit running higher once wiring and sensors are replaced. The estimate is free, and the price is set per job by the written estimate before any work starts.
Keypads and Remotes
A worn keypad or a batch of remotes that no longer pair is common on legacy systems. We test the receiver and the remotes together and replace only what’s actually failing. On older units where the original remote frequency is no longer supported, a receiver swap brings the system current.
Safety Sensors and Loops
Photocells and loop detectors from the 1980s and 1990s often no longer meet current UL 325 entrapment protection requirements. Retrofitting modern safety edges and photocells is usually cheaper than a new operator and satisfies the safety requirement at the same time.
Commercial Gate Operator in Universal City
A commercial gate operator in Universal City carries far more duty than a residential driveway unit, and it shows on the military-adjacent and small commercial properties around town. These operators run dozens of cycles a day, so control board failures, worn gearboxes, and loop detector faults are routine. Repair of a heavy-duty operator typically runs $400 – $1,200 depending on the module, and a full operator replacement climbs higher. We inspect the mechanical load first, because a strained gate will wear out any operator you put behind it. Reach out for a free estimate and a written price before work begins.
High-Cycle Wear Points
Commercial operators wear differently than residential ones: the gearbox, brake, and limit switches take the brunt. We check those before assuming the control board is at fault. Catching a worn brake early prevents a motor from cooking itself.
Loop Detectors and Access Integration
Exit loops, card readers, and phone-entry systems tie into commercial gates, and a failed loop will leave a gate stuck open or closed. We test the loop and the access controller together so the fix addresses the whole path, not just the operator.
Trusted Brands We Service in Universal City
We work on the brand you already have, and that includes the major operators you’ll find on Universal City gates. Whether it’s a legacy LiftMaster swing operator, a Mighty Mule DIY unit a previous owner installed, a Linear slide operator, or a heavy-duty DoorKing on a commercial property, our technicians are familiar with each one. We don’t stock brand parts locally, so we diagnose accurately on the first visit and order exactly what’s needed for a fast turnaround. A brand-agnostic approach means you’re never pushed toward a replacement when a repair will do. If a specific board is discontinued, we’ll say so and walk through the retrofit options.
Common Electric Gate Repair Problems We See in Universal City Homes
- Hinge post heave and rot. Universal City’s alkaline clay soil shifts with wet-dry cycles and hard freezes, so original wood and metal posts heave or rot at the base. That misaligns the gate and overworks the operator.
- Obsolete control boards. Legacy LiftMaster, FAAC, and Linear operators often have boards that are no longer supported. When a board can’t be sourced, we retrofit to a modern operator or replace it outright.
- Corroded or missing safety devices. Older installs frequently lack working photocells or loops, so the gate doesn’t meet current UL 325 entrapment protection and needs a retrofit even if the operator still runs.
- Wood drying and metal corrosion. South Texas heat cracks wood gates and corrodes hardware, causing binding and false reversals. Seasonal lubrication and hardware replacement keep the gate tracking true.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Universal City, TX
A typical electric gate repair in Universal City runs $180 – $450 for most calls, and a control board or operator module replacement lands around $350 – $900. Post resetting and hinge correction on an aging gate usually falls in the $300 – $750 range once the footing work is included. What moves the price is the condition of the gate itself: a gate that’s badly out of alignment takes more labor before the electronics can be evaluated. We give a free estimate and put the final price in writing before any work starts, so you’re never surprised by the invoice. The numbers above are typical estimates for this market; the written estimate sets the final price.
We Also Serve Cities Near Universal City
We handle gate repair and installation in the towns around Universal City, including Schertz, Converse, Cibolo, and New Braunfels. The same older-gate and legacy-operator work applies across these communities. If you’re just outside Universal City, call (855) 939-0250 and we’ll confirm the details.
Serving Universal City, TX – Our Local Coverage Area
We serve Universal City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Universal City
Yes, in most cases a legacy operator can be retrofitted with modern photocells and safety edges without replacing the whole unit. The retrofit brings an older gate up to current UL 325 entrapment protection requirements and costs far less than a new operator. Call (855) 939-0250 for an exact quote; estimates are free.
A gate that reverses with a clear path is usually binding on a heaving or rotted hinge post, not a faulty sensor. The operator senses the extra resistance and trips its entrapment protection, so the real fix is aligning the gate before touching the control board. Call (855) 939-0250 and we’ll diagnose it on-site.
When the board is no longer supported, replacement is often the cheaper long-term answer because a sourced board can fail again quickly. We’ll quote both paths and explain the trade-off honestly. Call (855) 939-0250 for a free comparison.
Widening a swing gate on a tight Universal City lot usually requires a variance, so the practical path is retrofitting the existing gate by resetting the hinge post and correcting sag. That keeps the gate within lot lines and usually costs less than a new install. Call (855) 939-0250 to talk it through.
An older wood gate in this climate needs seasonal lubrication, hinge and hardware checks, and a post inspection after wet-dry cycles or hard freezes. Caught early, these visits prevent binding and operator strain. Call (855) 939-0250 for a free estimate on a one-time visit.
Call Gate Repair New Braunfels for Universal City Gate Repair
Whether your gate is a 30-year-old wood driveway unit with a legacy operator or a heavy-duty commercial gate that’s started tripping its safety devices, we can tell you what’s fixable and what isn’t. Call (855) 939-0250 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and the price is agreed in writing before any work starts.
Written by the team at Gate Repair New Braunfels.